Learning Portal

Our hands-on, comprehensive lesson plans span a range of levels. Browse our free STEM and coding learning resources.

Marty Image

Shaking hands with Marty V2

Introduction

Using Scratch 3, you will create an interactive program when you get to shake hands with Marty, extending it to create your very own secret handshake with a robot.

What you will need

  • A device with our Marty the Robot v2 app downloaded and up to date
  • Marty the Robot v2

What will you learn about?

  • How to move individual body joints
  • How to detect force on individual body joints using force sensors

Extra information for educators

This tutorial walks students through how to move Marty's body joints and explores force sensors. It also uses parallel programming and variables.

offering a handshake

The first stage of most handshakes involves putting out your hand to offer the handshake to someone else. Our program with Marty should be no different.

Open up the Marty the Robot v2 app and follow the instructions there to connect your robot to the app. Then click on Code with Scratch to open a new Scratch project ready for coding.

Program Marty to get ready and lift the right arm.

With the arm and hand raised, the next step is to shake hands - by programming the arm to move up and down multiple times. To do this easily, we can make use of repeat blocks, also known as loops, to repeat the up and down motion of the handshake. As the final step, we should return the hand to Marty's side since the handshake is finished!

Hint: Change the number of times our program repeats the up and down movements to make the handshake longer or shorter!

adding some emotion

Now that we have a basic handshake happening, lets try and add some emotions into the movements to make our handshake look a lot more lifelike!

One way to add emotion into our movements is through using Marty's eyebrows! We can move the eyes to show a number of different emotions. Using the eyes block, when we click on the dropdown arrow then we get a list of options.

Hint: Try out the different ways you can program Marty's eyes

Try adding in some different eye movements during the handshake. Here is an example,

Hint: Stand up and give the person sitting beside you a handshake. Did you smile at them? When?

Challenge: moving marty's eyebrows in time with the handshake

We've already added some emotion into our sequence of movements that make up our handshake. However, can you make it even more exciting and move Marty's eyebrows each time the arm moves up and down?

Add some extra emotion blocks into our routine so that Marty's eyebrows move each time the arm moves up and down. Here are a few things you will need to think about,

  • How can you make two blocks of code run at the same time? You'll need to use parallel programming for this!
  • The timing of each movement so that your eye movements are in time with the arm movements
  • You might want to broadcast a message to know when to start the eye movements

I need some help!

To start off with, we will need to know when to start both the eye and arm movements at the same time. This can be done using broadcasting, where we broadcast or send a message across our Scratch program which can kick-start another set of blocks to run.

The broadcast blocks can be found under the Events section of our coding blocks. Once Marty has raised an arm, ready to start the handshake, we can broadcast a message telling the rest of our program to start the handshake.

Then all that is left to do is to run the two different actions! To do this we need to run our coding blocks in parallel - which means at the same time. Just like we can lift both arms at the same time, Marty can do some things at the same time.

Just above where you found the broadcast block in the Events coding block drawer, you will see a when I receive message1 block. This block will run when we broadcast the message. All that is left to do is to have two of these events happening - once for the arm movements and once for the eye movements!

Hint: Try playing around with the timing of the two different movements to get them in sync!

getting interactive with sensors

We now have a handshake motion happening with some wiggling eyebrows to go along with the movements. The next step is to make the action interactive by monitoring the sensors and reacting to someone pushing on the hand to start the handshake.

The next thing we want to do is use Marty's force sensors to work out when someone is ready to complete a handshake. We need to wait for someone to push down gently on Marty's arm to officially start the handshake. For this, we will use a sensor code block and a loop to keep checking if the sensor has recorded any force on the right arm.

Finally, lets add it into our overall program,

Hint: You will need to test what value to check for before starting the handshake but 3 is usually a good starting point!

What Next?

You have now just created and programmed your own handshake with Marty using Scratch. If you want to continue to explore how the force sensors work or how to continue to improve your handshake with Marty, here are a few ideas!

  • Adding sounds to your handshake. You could play different sounds in time with Marty moving the arm up and down
  • Add more moves into your handshake to create your own secret handshake with Marty. Can you program Marty to give you a high five?
  • Can you make a game of handshake bop it where Marty lifts different arms up or down and you have to respond within a certain time?